SharKa-50/CP3 Quick Change Knobs - Standalone
This product does not include lever anchors like in the Starter Kit. If you have not already purchased the starter kit please buy that here.
This is for an additional extension and knob to expand on the starter kit.
Product Description:
Designed to get the most from your Virpil CP3/SharKa-50 control panels and allow for easier reconfigurations for different applications, these levers utilize magnets to allow quick swapping between aircraft and layouts without the use of tools, except for the initial setup. The knobs are sized larger than Virpil stock offerings for comfort and are designed with a break-away point to give before your panel gets damaged. Everything comes pre-glued per your order specifications and only requires installation on your control panel. Straight extensions come in 4 sizes with a secondary “Z-Extension” option for those wanting 4 lever operation in a single hand.
Further details can be read below.
Knob Styles: Wide vs. Narrow
Knobs come in two styles, wide or narrow. Straight extensions are compatible with both wide and narrow knobs while the z-extensions are only compatible with narrow knobs. The knobs do not differ in shape only in width between the two styles.
Extension Styles: Straight vs. Z-Extensions
Extensions come in two styles, straight and Z-extensions. Straight extensions are used where 2 levers are operated, typically, at the same time. Straight extensions also come in 4 lengths: +00, +20, +40, and +60. The straight style extensions can also accept both wide and narrow knobs where the Z style can only use narrow knobs. Z-extensions are used where 4 levers are operated together, generally.
Details:
When you select your extensions, the lever number matters. Lever 2 and lever 3 wide knobs have an offset in them to space the knobs evenly. No matter how you have your panel mounted(levers on top or on bottom), the left-most lever is 1. Then, in order to 4 for the right-most lever.
These are printed in a manner to keep them as light as possible while maintaining an acceptable level of strength. These are designed to break before your panel, should something get caught on them. In the event of unscheduled separation of your knob from your extension do reach out for a replacement with your order number and a photo and Ill gladly get that replaced for you.
This product does not include lever anchors like in the Starter Kit. If you have not already purchased the starter kit please buy that here.
This is for an additional extension and knob to expand on the starter kit.
Product Description:
Designed to get the most from your Virpil CP3/SharKa-50 control panels and allow for easier reconfigurations for different applications, these levers utilize magnets to allow quick swapping between aircraft and layouts without the use of tools, except for the initial setup. The knobs are sized larger than Virpil stock offerings for comfort and are designed with a break-away point to give before your panel gets damaged. Everything comes pre-glued per your order specifications and only requires installation on your control panel. Straight extensions come in 4 sizes with a secondary “Z-Extension” option for those wanting 4 lever operation in a single hand.
Further details can be read below.
Knob Styles: Wide vs. Narrow
Knobs come in two styles, wide or narrow. Straight extensions are compatible with both wide and narrow knobs while the z-extensions are only compatible with narrow knobs. The knobs do not differ in shape only in width between the two styles.
Extension Styles: Straight vs. Z-Extensions
Extensions come in two styles, straight and Z-extensions. Straight extensions are used where 2 levers are operated, typically, at the same time. Straight extensions also come in 4 lengths: +00, +20, +40, and +60. The straight style extensions can also accept both wide and narrow knobs where the Z style can only use narrow knobs. Z-extensions are used where 4 levers are operated together, generally.
Details:
When you select your extensions, the lever number matters. Lever 2 and lever 3 wide knobs have an offset in them to space the knobs evenly. No matter how you have your panel mounted(levers on top or on bottom), the left-most lever is 1. Then, in order to 4 for the right-most lever.
These are printed in a manner to keep them as light as possible while maintaining an acceptable level of strength. These are designed to break before your panel, should something get caught on them. In the event of unscheduled separation of your knob from your extension do reach out for a replacement with your order number and a photo and Ill gladly get that replaced for you.
This product does not include lever anchors like in the Starter Kit. If you have not already purchased the starter kit please buy that here.
This is for an additional extension and knob to expand on the starter kit.
Product Description:
Designed to get the most from your Virpil CP3/SharKa-50 control panels and allow for easier reconfigurations for different applications, these levers utilize magnets to allow quick swapping between aircraft and layouts without the use of tools, except for the initial setup. The knobs are sized larger than Virpil stock offerings for comfort and are designed with a break-away point to give before your panel gets damaged. Everything comes pre-glued per your order specifications and only requires installation on your control panel. Straight extensions come in 4 sizes with a secondary “Z-Extension” option for those wanting 4 lever operation in a single hand.
Further details can be read below.
Knob Styles: Wide vs. Narrow
Knobs come in two styles, wide or narrow. Straight extensions are compatible with both wide and narrow knobs while the z-extensions are only compatible with narrow knobs. The knobs do not differ in shape only in width between the two styles.
Extension Styles: Straight vs. Z-Extensions
Extensions come in two styles, straight and Z-extensions. Straight extensions are used where 2 levers are operated, typically, at the same time. Straight extensions also come in 4 lengths: +00, +20, +40, and +60. The straight style extensions can also accept both wide and narrow knobs where the Z style can only use narrow knobs. Z-extensions are used where 4 levers are operated together, generally.
Details:
When you select your extensions, the lever number matters. Lever 2 and lever 3 wide knobs have an offset in them to space the knobs evenly. No matter how you have your panel mounted(levers on top or on bottom), the left-most lever is 1. Then, in order to 4 for the right-most lever.
These are printed in a manner to keep them as light as possible while maintaining an acceptable level of strength. These are designed to break before your panel, should something get caught on them. In the event of unscheduled separation of your knob from your extension do reach out for a replacement with your order number and a photo and Ill gladly get that replaced for you.